Power cables are mainly used for power transmission and distribution purpose. It is an assembly of one or more individually insulated electrical conductors, usually held together with an overall sheath. The assembly is used for transmission and distribution of electrical power. Electrical power cables may be installed as permanent wiring within buildings, buried in the ground and run overhead or exposed.……Including: rubber cable, welding cable, URD cable, XLPE insulated power calbe etc.
Bare Overhead Conductors are used in overhead transmission and distribution network applications.They are also used for un-insulated hook ups, jumpers, grounding conductors and other applications. Our Conductors conform to ASTM, IEC, BS, BS EN and DIN standards.…… Including: AAC conductor, AAAC conductor, ACSR conductor, ACAR conductor, AACSR conductor, etc.
Aerial bundled cables (also aerial bundled conductors or simply ABC) are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. Our abc calbe conform to ASTM, IEC, SANS standards.……Including: abc cables, cvered line wire, service drop wire etc.
16 mm2 3 core pvc sheath armoured cable:
1. Conductors: copper or aluminum.
2. armored and non-armored type are available.
3. Voltage rating: 6/10kV 8.7/15kV 26/35kV.
4. PVC or PE sheathed.
5. Number of cable cores: one core(Single core),two cores (double cores), three cores, four cores (four equal-section-area cores or three equal-section-area cores and one smaller section area neutral core), five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).
6. Standards: IEC 60502. IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special standards according to customers' request.
16 mm2 3 core PVC insulated power cable:
16 mm2 3 core PVC insulated power cables are used for general purpose, as building wire for power, lighting and control wire to electrical appliances, suitable for use in conduit and for fixed laying, protected installation.
1.U0/U: 0.6/1KV,8.7/15KV,26/35KV
2.Standard applied: IEC60502, BS7870, GB/T12706
3.Max. working temperature: 70°C, can be 90°C, 105°C and 125°C as per requirement
4.Conductor: copper wires
5.Insulation: PVC
6 Cores:1-5 cores
7.Cross section area:0.75-630mm2
8. Sheath:PVC
10.Flame retardant or Fire resistance or low smoking and Halogen free or other property can be avaliable.
16mm2 3 core abc cable:
1.Voltage: 0.6/1KV
2. Conductor: copper or aluminum
3. Insulation: XLPE/PE/PVC
4. Cores: 1 C, 2C, 3C, 4C
5. Nominal Cross-section: 10mm2 to 400mm2
6. Standard: GB/T 14049-2008 IEC 60502
7. Max. Operating Temperature: XLPE/PE: 90 °C , PVC : 70 °C .
9.Packing: Wooden Drum or according to the customer requirement.
Jiapu Cable is the professional power cable supplier, we can supply various of cables, if you have any need, please contact us by E-mail: [email protected]
Leave a Reply